CG Air 900W Hot Tub Air Blower

CG Air 900W Hot Tub Air Blower

This CG Air 900W Hot Tub Air Blower - SLE-90-230/50-AMP-CE-8 is designed specifically for use with hot tubs and spas. It is a 230V air blower commonly fitted to spa systems that need a reliable source of injected air for massage and bubbling effects, and is suitable as a like-for-like replacement where the existing unit matches the same rating, connections and mounting arrangement. Often used across a wide range of hot tub and spa setups, this type of blower may be found on systems from brands such as Jacuzzi, Sundance, Hot Spring and other European-spec spas, subject to checking the existing part details before ordering.

Key Features

• The 900W motor provides strong airflow output for hot tub and spa air systems that rely on a dedicated blower rather than water venturi alone.
• Designed for 230V 50Hz electrical systems, making it suitable for UK and European-spec spa packs where the original blower shares the same supply requirements.
• The air outlet connection should be matched carefully to the existing pipework to ensure a straightforward replacement and to maintain correct air delivery.
• Electrical connection must match the existing control box output and cable arrangement, particularly where the blower is switched directly from the spa pack.
• Suitable for like-for-like replacement of CG Air model SLE-90-230/50-AMP-CE-8 where the power rating, voltage and fittings are the same.
• Can be used on a wide range of hot tubs and spas, but compatibility should be confirmed against the original blower label, control system output and pipe connection size.

Blower Specifications

• Product Type: Air Blower
• Brand: CG Air
• Manufacturer Code: SLE-90-230/50-AMP-CE-8
• Power: 900W
• Voltage: 230V
• Frequency: 50Hz
• Intended Use: Hot Tubs and Spas
• Use: Air Injection / Bubbling System
• Electrical Supply: Single Phase
• Compatibility: Like-for-Like Replacement Where Ratings and Connections Match

Fitting Guide

If replacing a CG Air 900W Hot Tub Air Blower or model SLE-90-230/50-AMP-CE-8 on a like-for-like basis, installation is usually straightforward. Isolate the spa fully at the power supply, remove the blower power cable from the spa control box, unthread the air outlet pipe connection, remove the fixings securing the blower in place, and fit the new unit in reverse order.

For new installations, check that the spa pack provides the correct 230V 50Hz blower output and that the pipe connection size matches the plumbing already fitted. Confirm there is adequate space around the blower body for mounting and cable routing, and position the unit to suit the existing air line layout and fixing points.