Gecko 2kW Flow Thru SSPA Heater
Official high-quality replacement 2kW Gecko SSPA heater C2200-0800ET used specifically on hot tubs and spas. This particular 2kw heater uses Tecmark 3902 pressure switch (Sold separately) for flow detection and is secured within Gecko SSPA flow-thru metal control boxes with stud mounting. This heater is very common on older spa models and has been manufactured by many brands over the years, Therm Products, RMF, Spa Components & Gecko.
The following items are included with this complete Gecko spa heater assembly:
- 2x 2-inch heater gaskets
- 2x 2-inch split union nut collars
- 2x Mounting stud and 3/8" fixing nut
- 1x Hi-Limit sensor securing pouch
Gecko Heater Overview
- Heater can be fitted to Gecko control boxes such as Gecko SSPA.
- A metal pouch is located on one side to secure the hi-limit temperature probe in place.
- Supplied without pressure switch is used to determine how much flow is passing through the heater tube and prevents heater failure.
- Found on older spa models from brands such as Hotspot, LA Spas, Sierra Spas, Southwest Spas, Sunrise Spas, Artesian Spas, Gulf Coast & Coyote Spas.
Heater Specifications
- Manufacturer - Gecko Alliance
- Part Number - C2200-0800ET, replaces other older part numbers.
- Type of Product - Spa or Hot Tub heater assembly
- Kilowatt Rating - 2kW
- Element Material - Incoloy
- Flow Detection - 2 PSI Tecmark pressure switch 3902
- Sensor Type - Separate Hi-Limit and Temperature
- Plumbing Union Size - 2 inches (78mm thread OD)
- Pipework Connection Size - 2 Inch male (78mm OD)
- Length: 380mm,
- Length Inc Unions: 495mm
- Tube Diameter: 60mm
- Distance of Terminals: 31.75mm
Heater Fitting & Removal Guide
Loosen the two heater union collars by hand or with a wrench and if necessary the collars can be split into two and removed completely by unscrewing the two screws on the collar. Remove the chassis earthing copper cable from the heater tube and the Hi-Limit sensor from the securing pouch. Take the lid off of the SSPA spa control box and disconnect the two spade connectors from the pressure switch. Undo the 2x 3/8 nuts that secure the two power cables onto the heater terminals. Unthread the pressure switch from the heater tube and then undo the 3/8" nuts from the heater to control box mounting studs. Remove the heater completely and reinstall in the same order.
Take care when tightening the two heater power wires onto the new heater terminals, use a 1/4 inch spanner and hold the base of the terminal whilst tightening the 3/8 inch nuts up to prevent the terminals being twisted. New gaskets are supplied with the new heater so replace and fit these to your heater union connections. We advise renewing the pressure switch when installing a new heater, this is is listed in the related products below.
We Are Here To Help!
It can be a bit confusing choosing your new spa heater as brand names and models are not always written on them. The quickest way is to simply send us some images of the complete spa heater assembly you need the replacement for through our Contact us page and let us do the work for you.
Your order will generally be dispatched on the same working day, provided payment is received before 2 pm Monday - Friday. We use a few shipping companies such as DPD, EVRI, & DHL to achieve the most cost-effective methods for delivering the different types of products that we stock.
All our shipments are tracked and signed for by our designated shipping companies. If you leave us your mobile telephone number at the payment checkout, we will pass this on to the courier, and usually they will text you with delivery updates.
Most products are available for next working day delivery if ordered before 2 PM between Monday-Friday.
Expect orders placed on Friday to be delivered on Monday.
PLEASE NOTE:
- Although we do our absolute best to deliver the next working day, it is not guaranteed. At least 99% of our orders do and will arrive the next working day, but there are exceptions.
- We do not offer refunds for late arrival.
- When you receive your email notification from the courier, you will be given the option to change your delivery details. If you use this service and there is an issue with the courier, we accept no responsibility.
- All the delivery prices listed below are inclusive of VAT to the UK Mainland. All other countries will not be charged VAT unless specified.
- No chemicals can be shipped to the UK mainland with the exception of Northern Ireland. Unfortunately, we no longer ship chemicals to Ireland or any other European/International destinations.
SPA COVERS: Unfortunately, due to the size of spa covers, they have to be shipped by freight at a cost of £24.00 and usually take around 3-5 days to be delivered. Stock held covers take around 10-14 days from the time of order to be shipped, custom covers 6-8 weeks from the date of ordering. Covers are only sold and shipped to UK mainland customers, excluding remote areas such as the Scottish Highlands.
| Region | Cost & Delivery Time |
|
Delivery to England, Wales & Scotland (Excludes Spa Covers) |
DPD Next day delivery. £7.95 DPD Next day delivery. (Before 12:00 am) £11.10 DPD Next day delivery. (Before 10:30 am) £19.80 |
| Scottish Highlands & Islands | Delivery to the Scottish Highlands & Islands (Up to 20 kgs), Prices are doubled when over 20 kgs. DPD 2-3 days - £21.54 |
| Northern Ireland | Delivery to Northern Ireland (Up to 20 kgs), Prices are doubled when over 20 kgs. Economy delivery 2-3 days - £21.54 |
| Isle Of Scilly | Delivery to Isles of Scilly (Up to 20 kgs), Prices are doubled when over 20 kgs. DPD 2-3 days - £21.54 |
| Republic Of Ireland | Delivery to the Republic of Ireland (Up to 20 kgs), Prices are doubled when over 20 kgs. DPD 2-3 days - £25.00 (ex. VAT) |
| Isle of Man | Delivery to the Isle of Man (Up to 20 kgs), Prices are doubled when over 20 kgs. DPD 2-5 days - £21.54 |
| Jersey & Guernsey | Delivery to Jersey & Guernsey (Up to 20 kgs), Prices are doubled when over 20 kgs. DPD 2-5 days - £22.42 (ex.VAT) |
| Delivery to Belgium, France, Germany, Luxembourg & Netherlands. |
Delivery 2-3 days - £22.42 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Czech Republic, Slovakia, Italy & Spain (Mainland). | Delivery 2-5 days - £22.42 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Switzerland | Delivery 2-5 days - £48.04 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Austria & Denmark | Delivery 2-5 days - £22,42 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Iceland, Norway & Serbia | Delivery 4-6 days - £68.32 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Croatia, Estonia, Finland, Hungary, Poland, Portugal, Slovenia & Sweden | Delivery 4-6 days - £29.36 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Canary Islands: Gran Canaria, Tenerife, La Palma, Lanzarote, Fuerteventura, La Gomera, El Hierro. | Delivery 4-6 days - £82.20 ex.VAT (up to 5kgs), £118.49 ex.VAT (up to 10kgs), £192.15 ex.VAT (up to 20kgs), |
| Bulgaria, Greece, Latvia, Lithuania, Romania. | Delivery 4-9 days - £38.43 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs |
| Balearic Islands: Majorca, Minorca, Ibiza, Formentera, Cabrera. | Delivery 4-6 days - £32.03 ex. VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Cyprus | Delivery 4-6 days - £79.00 ex.VAT (up to 5kgs), £117.43 ex.VAT (up to 10kgs), £194.29 ex.VAT (up to 20kgs). |
| United Arab Emirates, Bahrain, Qatar. | Delivery 4-9 days - £122.76 ex.VAT (up to 5kgs), £186.81 ex.VAT (up to 10kgs), £256.20 ex.VAT (up to 15kgs), £320.25 ex. VAT (up to 20kgs). |
| Turkey, Russia & Malta. | Please call us for a quote. |
| USA | Delivery Via UPS 4-5 Days - £75.00 ex.VAT (up to 20 kgs), Price doubles when over 20 kgs. |
| Worldwide Shipping | We can ship parts worldwide. If your country is not listed above then please contact us for a shipping quote. |
No posts found
Related products
Order Hot Tub Parts by Phone
Fast Shipping to UK & Europe
Full Product Warranty
No Quibble Returns Policy
Lowest Price Guarantee
